Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
project
zulassungen
Ich bewerbe mich auf die Stelle:

Chemical Anchors

Hinzufügen von Anschreiben/Lebenslauf/Zeugnissen etc., max. 5 Dateien, max. 10MB

Chemical anchors

Header Chemischeduebel

Injection System VMZ

Injektionssystem VMZ

Variants:

Injection System VMZ / A4 / HCR, VMZ-IG, VMZ dynamic

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Indicates anchors that are approved for the absorption of fatigue-relevant (dynamic) loads., Indicates anchors that are suitable for use under seismic loads., Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, Fire-tested in accordance with the ZTV tunnel fire curve., Shock authorisation from the Federal Office for Civil Protection, Bern, Switzerland, Indicates the emission class according to the French regulation on indoor air emissions from construction products (No. 2011-321 of 23 March 2011). The scale ranges from A+ (very low emissions) to C (high emissions)., Material symbol for stainless steel (A4 or HCR grade 1.4529), Indicates the dowels for which no further cleaning steps are required when drilling holes with the MKT SB suction drill., Indicates the anchors that can be calculated with the MKT dimensioning software

Injection System VMH

Injektionssystem VMH Kombi 1

Variants:

Injection System VMH for cracked and non-cracked concrete, Injection System VMH for post-installed rebar connections

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Indicates anchors that are suitable for use under seismic loads., Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, ICC authorisation, NSF certification of the United States of America for use in drinking water systems., Indicates the emission class according to the French regulation on indoor air emissions from construction products (No. 2011-321 of 23 March 2011). The scale ranges from A+ (very low emissions) to C (high emissions)., Material symbol for stainless steel (A4 or HCR grade 1.4529), Indicates the dowels for which no further cleaning steps are required when drilling holes with the MKT SB suction drill., Indicates the anchors that can be calculated with the MKT dimensioning software

Injection System VMU plus

Injektionssystem VMUplus Kombi 01 1

Variants:

Injection System VMU plus / VMU plus Polar for cracked concrete, non-cracked concrete and brickwork, VMU plus / VMU plus Polar for post-installed rebar connections

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Indicates anchors that are suitable for use under seismic loads., Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, ICC authorisation, NSF certification of the United States of America for use in drinking water systems., Indicates the emission class according to the French regulation on indoor air emissions from construction products (No. 2011-321 of 23 March 2011). The scale ranges from A+ (very low emissions) to C (high emissions)., Material symbol for stainless steel (A4 or HCR grade 1.4529), Indicates the anchors that can be calculated with the MKT dimensioning software

Injection System VME plus

Injektionssystem VMEplus 1

Variants:

Injection System VME plus for cracked and non-cracked concrete, Injection System VME plus for post-installed rebar connections

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, National approval of the German Institute for Building Technology, Berlin, Indicates anchors that are suitable for use under seismic loads., Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, ICC authorisation, NSF certification of the United States of America for use in drinking water systems., Indicates the emission class according to the French regulation on indoor air emissions from construction products (No. 2011-321 of 23 March 2011). The scale ranges from A+ (very low emissions) to C (high emissions)., Material symbol for stainless steel (A4 or HCR grade 1.4529), Indicates the anchors that can be calculated with the MKT dimensioning software

Injection System VM-EA

Injektionssystem VM EA Kombi 01 1

Variants:

Injection System VM-EA

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Indicates the emission class according to the French regulation on indoor air emissions from construction products (No. 2011-321 of 23 March 2011). The scale ranges from A+ (very low emissions) to C (high emissions)., Material symbol for stainless steel (A4 or HCR grade 1.4529)

new

Chemical Anchor VZ

Injektionsmo rtel VZ 1

Variants:

Chemical Anchor VZ, VZ-IG

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, Indicates the emission class according to the French regulation on indoor air emissions from construction products (No. 2011-321 of 23 March 2011). The scale ranges from A+ (very low emissions) to C (high emissions)., Material symbol for stainless steel (A4 or HCR grade 1.4529), Indicates the dowels for which no further cleaning steps are required when drilling holes with the MKT SB suction drill., Indicates the anchors that can be calculated with the MKT dimensioning software

Chemical Anchor V

Leitplankensystem V L 08 1

Variants:

Chemical Anchor V / V A4 / V HCR, V-IG / V-IG A4

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, Material symbol for stainless steel (A4 or HCR grade 1.4529), Indicates the anchors that can be calculated with the MKT dimensioning software

Threaded Studs, Perfo Sleeves and Tension Anchors for MKT Injection Systems

Ankerstangen 1

Variants:

Threaded Studs, Perfo Sleeves and Tension Anchors for MKT Injection Systems

Data sheets

Certifications

Material symbol for stainless steel (A4 or HCR grade 1.4529)

Accessories for MKT Injection Systems

Zubehoer

Variants:

Accessories for MKT Injection Systems

Data sheets

Certifications

Hollow drill bit SB

Saugbohrer Kombi 04 1

Variants:

Hollow drill bit SB, Suction bell ASG

Data sheets

Certifications

Filling Washer VS

Verfuellscheibe VS 1

Variants:

Filling Washer VS

Data sheets

Certifications

new

Injection System VME basic

Injektionssystem VMEplus New

Variants:

Injection System VME basic for cracked and non-cracked concrete, for post-installed rebar connections

Data sheets

Certifications

European Technical Assessment (ETA) with CE mark, Indicates anchors that are suitable for use under seismic loads., Fire tested according to the standard temperature curve taking into account DIN EN 1363-1 and in accordance with TR 020. For anchors not suitable for tension zones, it must be checked and evaluated depending on the design situation whether the design method specified in TR 020 may be used, NSF certification of the United States of America for use in drinking water systems., Indicates the anchors that can be calculated with the MKT dimensioning software

Request advice now

Discover our wide range of products and services. Get expert advice to find the right solutions for your needs.

Contact